| Prod.Desp. | Din Rail Terminal Block-RUT Series Screw Connection RV |
| Item No. | RUT2.5/RUT4/RUT6/RUT10/RUT16/RUT4-TWIN/RUT4-QUATTRO/RUTTT4/RUT4-HESI/RUT4-HEDI/RUT4-MT/RUT4-MP-P/P)/RUT6-RTK/S)/RUT6-T-HV/RUT6-T-HV P/P)/RUT2.5-PE/RUT4-PE |
| Material: | PA/Brass |
| Thickness(mm) | 5.2/6.2/8.2/10.2/12.2 |
| Width(mm) | 47.7-55.3 |
| Depth(mm) | 47.5-55 |
| Connection | Screw |
| Cross Section(mm2) | 0.14--25.0(Solid Wire)/0.14-25.0(Flexible Wire) AWG26-4 |
| Rated Voltage(V) | 1000 |
| Rated Current(A) | 24-76 |
| Strip Length(mm) | 8-14 |
| Flammability: | V0 |
| Standard | IEC60947-7-1;GB/T14048.7 |
| DIN Rail: | U |
| Color: | Grey(Optional: Blue/Red/Yellow/Green),Yellow-Green |
| End Plate | D-RUT2.5/10;16;2.5/4-TWIN;4-QUATRO;TTB4;4-HESI;4-MT-P/P;6-RTK;6-T-HV P/P |
| Marking Strip: | ZB |
| Jumper | FBS |
| Certificate | CE;RoHS,Reach |
Gound/Earthing Terminal Blocks with specially designed alloy feet which help in achieving very low contact resistance and vibration proof grounding with the DIN rails.
They are green / yellow colour coded as per industry standards.
Cross connection of these Terminal Blocks can be done using standard pluggable jumpers.
Multi connect 3 wire & 4 wire screw clamp Terminal Blocks are used to eliminate reliability problems encountered when there is a need to connect multiple wires in a single Terminal Block.
Compact double level Screw Clamp Terminal Block. This Terminal Block is used in high density wiring applications.
Jumpering is possible at both levels. This Terminal Block is suitable for 1000 V rating.
PV is double level internally shorted screw clamp Terminal Block. This is an ideal choice for distribution application.
is double level Terminal Block with a grounding point for terminating grounding cables on the lower level of the terminal block while
the top level is a standard feed through terminal.
The earth connection is made by snapping the terminal on the Din rail. This separate connection point is appropriately identified by the greenyellow imprint on its top.
KK/KKB is double level ground Terminal Block with 4 connection points for grounding wires. It is available in a standard green yellow colour to indicate the grounding connection.
Fuse Terminal Blocks are used in electrical and control systems which require fuse protection.Disconnect blocks are used for measuring, control and regulatory circuits.
|
No. |
Part Desp. |
Material |
Surface Finishing |
Qty |
Color |
Remark |
|
1 |
House |
Nylon |
/ |
1 |
Grey |
UL94 V-0 |
|
2 |
Screw |
Brass |
Nickel |
2 |
Natural |
/ |
|
3 |
Conductor |
Brass |
Nickel |
1 |
Natural |
/ |
|
4 |
Cage |
Brass |
Nickel |
2 |
Natural |
/ |
UBE/D KLM-A UC-TMF6 E/UK(N)
| Terminal marker block, used Mark for terminal on guide rail Remember, can write identification number | Used for wiring when the terminal is used, it is used in the middle Grouping marks between, used in fixed Middle mounting and marking identification of pieces | Professional design in Wiring terminals are used in the usual In this case, you can use a blank mark
Write or use typography 1-100 Characters, special characters can be customized |
Used in the end The first and the last parts of the device are fixed terminals Function, usually in a group With the two. |
| End plate: used for the bare metal part of the terminal at the end of the product to protect the terminal from oxidation. | The grouping partition is used to separate and break the connection between terminals when different terminals are used, and can also play the effect of grouping |
TS35Made of steel, galvanized surface, used for installing and fixing terminal. |
| EB10-5 The SIDE BRIDGE IS USED TO short and CONNECT adjacent TERMINALS. It can be cut short according to the specific application. It can be used to connect all terminals between two and ten terminals | FBS 10-5Plug BRIDGE, Used for short circuit connection between TERMINALS, 2 poles, 3 poles, 4 poles, 5 poles AND 10 poles can be used to CONNECT according to different situations. |
Stored in the air circulation and relative humidity is not more than 80%, the temperature is not higher than +40℃, not less than -10℃ warehouse;
Storage of ambient air free from acidic, alkaline or other corrosive gases.
Product design meets Rosh requirements.