Home Categories Send inquiry

RST series spring cage terminal block

Technical Parameter

Standard: IEC60947-7-1   GB/T 14048.7
RV/RA: 600V  31A
Wire Rnage 0.2-4mm2(Solid)/0.2-2.5mm2(Flexible)
Torque: M3 /0.5-0.6 N.m
Flammability: UL94 V-0
WFV: AC2500V,1Min
Salt&Spray Test: Reference standard GB/T 10125, can ensure the salt spray 72H test qualified.
Pollution Grade: 3
Operation Temp.: -40℃~+105℃

Dimension

BOM

No.

Part Desp.

Material

Surface Finishing

Qty

Color

Remark

1

House

Nylon

/

1

Grey

UL94 V-0

2

Spring

SS

/

2

Silver

/

3

Conductor

Brass

Nickel

1

Silver

/

Accessory

The stop is used for fastening both ends of the terminal block. Applying for grouping mark in

the middle when terminal is used, for mounting and mark identification in

the middle of fastener.

Mark, terminal mark function, in the normal case can use blank mark writing or use 1-100 characters printed, special characters can be customized. Plug - in bridge for horizontal bridging between adjacent terminals.
End plate: End plate: used for the bare metal part of the terminal at the end of the product to protect the terminal from oxidation. Partition plate is used to separate and break the connection between terminals when different terminals are used, and can also play the effect of visual and electrical isolation between terminals.

TS35Made of steel, galvanized surface, used for installing and fixing terminal.

Storage Condition

Stored in the air circulation and relative humidity is not more than 80%, the temperature is not higher than +40℃, not less than -10℃ warehouse;

Storage of ambient air free from acidic, alkaline or other corrosive gases.

Environmental compliance

Product design meets Rosh requirements.


RST series spring cage terminal block Related Video: